Support Center

No Display on CSC600/WCSC600

Last Updated: Jun 26, 2017 09:50AM CDT
If you have no display on your CSC600/WCSC600, check the following:
  1. You may have the wrong AC adapter plugged into the phone.  If the screen lights up and the phone works, but there is just no display, then the AC adapter in the phone may not have enough power to operate all functions of the phone.  Check the output on the adapter and make sure it is 7.5 Volts and 500 mAh.  If you have an adapter with any other output, you need to unplug it from the back of the CSC600 and call us to order the correct adapter.
  2. The AC adapter may no longer be working. If the screen and keypad do not light up at all, and the amplification on the phone does not work, then the AC adapter may either be unplugged or may have stopped working.  Check the power outlet and make sure the adapter is plugged in.  You may even try moving the adapter to a different outlet to see if that brings the phone to life.  If that doesn't work then you will need to call us to order a new adapter.

Contact Us
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found